Fiberguide Industries - Acrylate Coated Silica/Silica Tapers
Fiberguide Logo
   Catalog Search  
  
 Search Catalog
      GO   
 All Categories    Acrylate Coated Silica/Silica Tapers
All Categories > Tapered Optical Fiber  > Acrylate Coated Silica/Silica Tapers > View Items 
    Print Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Acrylate Coated Silica/Silica Tapers
Check up to five results to perform an action.

Tapered Series - Buffer Coating

larger image 		Tapered optical fibers can be made either by fusing a short tapered section onto a longer fixed diameter fiber, or, by very carefully controlling the drawing process to produce a single continuous fiber with an integral tapered section. Fiberguide used the latter process since it results in superior fiber strength, alignment precision and optical power transmission. Tapered optical fibers cause optical mode mixing that tends to homogenize spatial power distribution. A larger input core diameter can prevent input damage and allow a smaller diameter pigtail for convenience in adapting to a wide range of optical applications.

Fiber Specification :
  • Standard Numerical Aperture (N.A.):
    0.22 ± 0.02 (Full Acceptance Angle 25º)
  • Available Numerical Apertures:
    0.12 (Full Acceptance Angle 14º),
    0.26 (Full Acceptance Angle 30º)
  • Available Core/Clad Ratios:
    1.1, 1.2, and 1.4
  • Buffer Material: Acrylate
  • Input to Output Ratios: Up to 4:1
  • Input Core Diameters :
    100 µm to 800 µm
  • Taper Lengths:
    -Tapered Lengths: 1 to 3 Meters,
    -Pigtail Lengths: Any Specified Length ≤50 Meters,
    -Overall Length: 3 to 10 Meters (Typical)
  • Non-standard Sizes Available as Custom Run (call for details).
Note : The fibers in the following table carry a designation “SFT” standing for “Silica Fluorinated Taper” and “AFT” standing for “Anhydrous Fluorinated Taper” followed by the large core diameter and small core diameter (in microns) and concluding with the suffix “Y” that designates Acrylate coating.


Request InformationCompare Items   Results per Page : 
  Results 1 - 12 of 12 1 

Item #

Type

Core A Diameter

Core B Diameter

Operating Wavelength

Buffer Material

Input to Output Ratios

Input Core Diameters

SFT100TO50Y Standard OH Plastic Coated Silica/Silica 100µm ± 2% 50µm ± 2% 180nm - 1100nm Acrylate Up to 4:1 100µm to 800µm
SFT200TO100Y Standard OH Plastic Coated Silica/Silica 200µm ± 2% 100µm ± 2% 180nm - 1100nm Acrylate Up to 4:1 100µm to 800µm
SFT300TO100Y Standard OH Plastic Coated Silica/Silica 300µm ± 2% 100µm ± 2% 180nm - 1100nm Acrylate Up to 4:1 100µm to 800µm
SFT400TO200Y Standard OH Plastic Coated Silica/Silica 400µm ± 2% 200µm ± 2% 180nm - 1100nm Acrylate Up to 4:1 100µm to 800µm
SFT600TO200Y Standard OH Plastic Coated Silica/Silica 600µm ± 2% 200µm ± 2% 180nm - 1100nm Acrylate Up to 4:1 100µm to 800µm
SFT800TO200Y Standard OH Plastic Coated Silica/Silica 800µm ± 2% 200µm ± 2% 180nm - 1100nm Acrylate Up to 4:1 100µm to 800µm
AFT100TO50Y Low OH Plastic Coated Silica/Silica 100µm ± 2% 50µm ± 2% 400nm - 2400nm Acrylate Up to 4:1 100µm to 800µm
AFT200TO100Y Low OH Plastic Coated Silica/Silica 200µm ± 2% 100µm ± 2% 400nm - 2400nm Acrylate Up to 4:1 100µm to 800µm
AFT300TO100Y Low OH Plastic Coated Silica/Silica 300µm ± 2% 100µm ± 2% 400nm - 2400nm Acrylate Up to 4:1 100µm to 800µm
AFT400TO200Y Low OH Plastic Coated Silica/Silica 400µm ± 2% 200µm ± 2% 400nm - 2400nm Acrylate Up to 4:1 100µm to 800µm
AFT600TO200Y Low OH Plastic Coated Silica/Silica 600µm ± 2% 200µm ± 2% 400nm - 2400nm Acrylate Up to 4:1 100µm to 800µm
AFT800TO200Y Low OH Plastic Coated Silica/Silica 800µm ± 2% 200µm ± 2% 400nm - 2400nm Acrylate Up to 4:1 100µm to 800µm
  Results 1 - 12 of 12 1